| PLANT PARAMETERS |
| Capacity, Nos. PA |
10,000 |
| Number of shifts |
1 |
| Working days / Yr. |
300 |
| Land Reqd., m2 |
100 |
| Covered Area, m2 |
50 |
| MANPOWER |
| Managerial |
1 |
| Skilled Worker |
6 |
| Unskilled Worker |
2 |
| RAW MATERIAL |
| Semi conductor, Core |
Integrated circuits |
| Capacitors, Torroid, Diodes |
Transistors, Resisters |
| UTILITIES (Per Annum ) |
| Power, KwH |
1000 |
| PLANT & MACHINERY |
| Oscilloscope, Lux meter |
Winding machine |
| Dimmer stat, Ageing rack |
Gain Meter, Testing tools |
| PLANT PARAMETERS |
| Capacity, TPA |
300 |
| No.of Shifts / day |
1 |
| Working days / Yr |
300 |
| Land Area, m2 |
200 |
| Covered Area, m2 |
100 |
| MANPOWER |
| Managerial |
1 |
| Skilled |
2 |
| Unskilled |
5 |
| RAW MATERIAL |
| Bovine Blood |
Solvents & chemicals |
| PLANT & MACHINERY |
| MS Jacketed vessel |
Chain pulley block |
| Chilled water unit |
Water tank |
| Displacement mono pump |
Balance |
|
Energy efficient lighting system and the associated
products are need of the hour. The energy load in a lighting system depends
on the use of efficient lamps being used. Ballast used for operating lamps offer
perhaps the most sustainable improvement in energy load to typical lighting
system.
APPLICATION/USES
OF THE PRODUCT
| |
Conventional
|
Electronic
Ballast
|
| |
|
Local make
|
Brand name
|
Offered technology
|
| Safe Working Voltage |
190V to 250V AC |
120 to 270 V |
120 to 300 V |
90 V to 320 V ( after 320 V it switches off) |
| Protection for high temp. |
Nil |
Nil
|
Yes |
Yes, it switches off after attaining 560c or
60 0 c settable |
| Protection for surges |
Nil |
Nil |
Yes, upto 7 KV |
Yes,
upto 14 KV |
| Protection for high current |
Nil |
Nil |
Yes, with tube |
Yes,
with double fuse |
| Protection for high voltage |
Nil |
Nil |
No |
Yes, (it switches off if voltage is more
than 320 V AC |
| R.F.& EMI Filters |
Nil |
Nil |
Yes |
Yes |
| Housing |
Mild steel |
Mild steel |
Mild steel |
Aluminium with chemical finish |
| Power loss at 240 V AC |
14 to 15 W |
3 to 4 W |
1.5 to 2 W |
1.5 to 2 W |
| Efficiency |
50 % |
85 % |
> 90 % |
95 % |
Fluorescent lamps (tube lights) are used for
indoor lighting in almost all premises e.g. homes, shop floors of industries,
commercial centres, offices, clubs, shops, restaurants, hotels, etc. To run a
fluorescent lamp, an electromagnetic choke and a starter is required. The
electromagnetic choke always consumes lot of energy which affects the efficiency
of the lamp. This choke can now be replaced by an Electronic Ballast for
reducing such losses drastically. The electronic ballast saves about 35% of
energy. Thus it is used wherever there is a fluorescent lamp.
Product Quality
The quality of the product produced by the
offered process as compared to the branded products is given below.
Few common disadvantages of 'Conventional Chokes':
- Does not function at low voltages
- Requires starter to operate
- Flickering
- Radio frequency interference
Electronic Ballast overcomes these
'defects effectively'
Major advantages of Electronic Ballast:
- Saving in Energy
- Longevity of tube (Double)
- Low noise
- Operates at low voltages
- No RF or stroboscopic effect
- No heat
- Instant-Start operation
- No Noise
- Low Voltage Lighting
- Minimal Weight
- No Starter Required
- No Flickering
|
